Bought a Brookville 3 window dash off a HAMB member and putting it in my Vicky. Anyone have some tips or pictures ?
Ok so so a 3 window dash into a 5 window should be the same steps etc. I’ll do a search later I’m sure it’s been covered
Browsing a couple dozen threads when I searched for this I couldn’t find any solid examples but it does seem that majority of the shape difference is the top of the dash so many suggested splicing the top of a 5 window dash onto a 3 window dash would be be quickest route if your not a proficient metal shaper.
Thanks for the assistance. There is a difference in the way it mounts, closed car is by screws on the face, 3 window from behind. Until I get the dash in my hands, gonna be a guessing game.
It would be interesting to see a 3Window and Coupe/Sedan with the dash removed, I think the understructure under the windshield may differ. Bob
3 window is all on its own the dash has slots , that drop down on bolts in the cowl tightened from under the dash inside . One bolt each lower corner . At lease that’s the why my 3w is .
Is the 32 Vicky a Murray body the same as the 3 window is? @deucepickup32 does your Vicky have the screws in the face of the dash?
i have a glass 32 3 window dash in a 32 pickup.. center hole lines up. 3 widow is shorter than truck, and likely car.. so I think you will need to add to the end of the dash.