The Jalopy Journal
well, my original project has changed course.....i wanted to do a gasser but I really like low and slow so I got the truck down last night,...
I am building a 55 dodge truck, I want to go the gasse route with it. I am curious if anyone has some good pictures of this era truck done this...
I am running a flathead V8 with a 3 speed that has the electronic overdrive hence is open drive. I am also running a 46 ford rear end that was a...
I picked up this axle yesterday because I wanted the wide five hubs and rims, but I am confused by the axle/spindles. The spindles look like 32...
I have a good running flathead that I pulled out of a shoebox 2 years ago, before I pulled it out the car had a 12v battery that the car was...
what is the best source that you guys have found for 40 ford brake shoes and cyliners? I can get the cylinders from the auto parts store but was...
I am setting up the front end on my A and have a question, I have a 26" spring but I have a 46 ford axle so the perch pins are much farther apart...
I am looking at how to set up my rear suspension mount on a modified I am going to build. I will be using a 46 banjo and would like to use the...
I have a 5 x 5 chevy bolt pattern disc setup on the front of my 49 chevy truck, I want to run 4" wide front wheels on it but am having a tough...
what would the class be for altered wheel base trucks from back in the day? I am building a 49 chevy 5 window Pick up that has a slightly altered...
Wanted to post my 51 4door. I have been plugging on it for a little while and wanted to post the progress...
I damaged my gears while doing a burnout while leaving our wedding and wanted to find out how to verify what rearend I have for sure prior to...
Okay, I have read and looked at alot of articles, here are my specific questions: I have a set of 32 spindles. 1. do these use the 37-41 king...
So I bought a 30 chevy pick up cab, it is totally disassembled. The roof I received with it did not appear correct as a chevy cab is square at...
Does anyone have any pictures of early 60's era drag trucks? I am building a 30 chevy truck with the intentions of it being modeled loosely off...
I combed the tech archives and couldnt find what I was looking for so here goes, real simple, can I use a 49 ford rear wheel cylinder on a 48 ford...
I am running a hot rod works open drive conversion on my 37 banjo and I know I hav eto vent it and I also know that this is a dumb question but,...
I wired up the T today and hit the swtch, turns over, has great spark, pulling fuel, but wont start. it pops back through the carb and acts like...
I have a set of backing plates for my car that are like 40 ford plates but have pretty much no back to them except for the required areas that...
there are two wires coming out of my HEI for my modified, it is a gm unit one wire is orange the other is black. what do each of them need to be...
I put a hotrodworks open drive conversion on my banjo and was wondering where the best place to put the vent would be, I am assuming I can put it...
well, I rolled her out today, she'll be running next weekend. cant wait, Think I am going to sell it to do an A but it sure is cool I think. open...
what are the requirements to run a car on the salt. I am building a modified T that wont be a rocket ship by any meens but I am planning to go to...
I am building a T that I am using a 4 cyl in, a 1.6L GM model, I was wondering if I ran it with out a fan if it would get hot, obviously while...
How would I go about stripping th echrome off of my bumpers so I could paint them?
I was wondering if any of you have sprayed the sea foam green house of kolor primer and how it holds up as a finish coat or if I should spray flat...
heres the pics fellas, what a deal I found! The flatty is going to be removed to be used in a future roadster project by a HAMBER and the shoe is...
I was cruisin craigs list and found a 1949 ford shoebox, 2 door, flatty 8 with OD 60K 2 owners. I go up to look at it and the flatty has chrome...
I posted a while back that I was starting this, so here it is. the engine went in this weekend, wheels and tires went on, body was set on,...
approx. how many CFM is a holley 94?
Separate names with a comma.