The Jalopy Journal
I have been following this from the start and have some information that may help you or at least narrow down the years of your search. I have an...
try http://www.vintagerodcomponents.com/gauge.htm they list them for both temp ranges of sun gauges.
did you try vintage rod components , they list the sending unit to fit sun gauge 1002,1003, cp7956 . cost is $12.05
My 32 5 window is not like the 3 window in the pics .The regulator mounts with 3 screws . two screws go thru a metal cover similiar to the 3...
engine suffix code fb is a 1969 327 with powerglide in a full size car, got this off nastyz28 web site ,hope this helps .
jerseyjim , i just went out and checked my 41 , your arm is mounted correctly . it's hard to tell from the pics but were the springs chromed if so...
Do you have any other info , i will ask around here to see if i can find the seller.
The made in Canada box has a metal tag attached to cover bolt which says made in canada , hope this helps.
thanks again for the responses . I orignally set this up with a set of blockhuggers , then decided i liked the look of the longer header . I went...
Thanks for all the comments , i"m Going to send them back, but would like to hear from someone , who has used another company's long tube headers...
The problem i am having is the headers are hitting the shaft on the steering box . The setup is 327 chev. vega steering , patriot long tube...
Here is alink to the car club in Glendive , if you email them they can answer your question . www.badlandsdrifters.com they are agreat bunch of...
Ihave also tried to find imfo on these guages , they seem to be most noted for their tachs . I have two sets of sun guages speedo, temp, oil,gas...
I also tried to join and get a copy of the Duece dvd back in June even sent them a US address as requested several emails later nothing . Sent...
I have one What do you need to know.
great looking car , did you find some valve cover adaptors yet i am also looking for the adaptors and another pontaic valve cover. If i remember...
check out may 2007 r&c for a article on this , I used this process and have had good luck with it.
Mine measures 104'' back of cab to nose of the hood , the cab alone is 56'' long and 56'' wide at the back of the door , hope this helps if you...
REcheck the engine suffix code like squirrel said there is no jo code . most codes are 8 letters & numbers not 7 . Agreat site for checking suffix...
could the number be 3737739 ? if it is mortec lists it as a 283 1958- 1964 2 bolt main , like deuce roadster said the numbers and letters on the...
After hearing about this site from kruiser 63 and lurking around for the past year decideded to join up. I"m bob f. from Regina , SASK. I' m mid...
Separate names with a comma.