The Jalopy Journal
I've been off here for a while and need some help. I have acquired a 2 door 55 sitting on a 78 4x4 blazer frame. It has a good running 454/ 4...
I need a set of chevy 7.5 10 bolt ,26 spline axle ,factory positive traction carrier, spider gears
I need help trying to identify the year model front end I have under my truck.Im getting ready to buy some drop spindles and not sure how to tell...
I went with a ford 9 inch from 66 f100(3.70 ratio) .61 1/2" wide overall.Tires clears wheel well 3/4 " on each side.Looks good .Picked up a...
Thanks for the info.I'm leaning toward a late 60,s f100 9 inch.It's within a 1/2 inch width of what i need and already has the 5.5x5lug pattern.
I have a new set of wheels and tires for my truck the only problem the rear wheels are so wide they want fit under my truck.I have a 10 bolt from...
first of all i haven't been on hear in a while so i hope everyone is doing good.i need help i have a turbo 350 the other day i put it in drive and...
sorry it took so long to respond findings but with work and home projects i got side tracked.it was the intake gasket,when the builder put it...
i have a 350 leaking oil down the back of the motor(mainly passenger side) dripping on header.ive looked and cant see where its coming from.its...
could be wrong but i beleive i would use a dc set up with a controller 90 volt or 180 volt it would have better controls for what your doing.in...
my wife supports me but dont understand.she dont get the fact that her hobbies cost us after you finish with a flower arrangement etc.to the...
you think ups is rough on products go to the airport and watch them handle your luggage.no respect anymore.
i use grinder on 90 percent of cuts.only problem is you have to stock up on cutoff wheels.plasmas are great but i always seem to follow the person...
use a hand grinder with a cut off wheel cut through the weld ,hit with a big hammer it should pop off.the prep area where your welding to as well...
you can find some great deals on craigslist.thats what led me to my mysterymotor intake.yesterday i bought a set of early 70's z28/chevelle 15"...
thats terrible,glad your ok .i would invest in a water heater stand to prevent this.where did gas come from it appears inside your car burnt...
i married a real keeper ( 25 years dec. 18.)shes a stay at home housewife so i figured anything she gets me its kinda like im buying it for...
i had one doing the exact same thing it cured itself going down the road.used rearend was cheaper than towing fee
bought a malibu once."original" motor in it wasnt big enough.so i saved up built new 350 put in there.gave my brother old motor since it was...
this story brings back memories.we would go to my dads on weekends. he ran a used/new autoparts store.it was owned by a family and employed nearly...
great work looks good but in one picture looks like you have created opposite problem.you said that it bothered you that it was narrower now it...
went by scrap yard yesterday the cars sitting in the pile to be crushed was nicer than most cars driving by.people will scrap any and everything...
you need to charge battery leave both + and - off see if its going dead by itself.new dont always mean good.just went through same thing on a car...
will a truck 8.5 ring gear ,pinion,and carrier fit into a car 8.5 housing.ive been told it should all i would have to change are the peices?that...
our miller welder at work when you tig the ground goes to + plug and the tig rig to the - plug and when you stick weld the ground goes to the-...
Whats bad is you work at finishing a project what seems forever and loose interest.End of getting rid of it and a short time later it passes you...
( this is not true for answers).ive ran both 2 and 4 bolt blocks never had an issue with either one.ive heard 4 bolts are stronger??any pictures...
curious what kind of car is it.post some pictures
please use" traditional " spelling
no im actually putting the complete truck rear end under my car just converting to 5 lug car pattern using my brakes and back plates..yes im going...
Separate names with a comma.