The Jalopy Journal
I find it interesting that those 2361 units were used on so many different engines and such a variety of the auto manufactures . Buick,...
Would you please share the carb numbers with us? They look like 2361S ? Oldmics
Measures 53 inside of backing plate to inside backing plate. 3:10 ratio pumpkin Believe its actually the shortest axle Ford made at 57 1/4 Out...
That pictured engine is a Lincoln Y Block. That B manifold aint gonna go on that engine. Now the linkage differs between a stick tranny and an...
1956 Ford 312 engine ECZ 6015 C cast on block Has "C" heads. ECZ markings on main caps.Definatly an original 312 Has been wet and is stuck.Crank...
I figured it out. Originals (or the good ones) have a 3/8 head bolt holding the halves together and the junk ones are held together with an...
I had read somewhere that there is a way to distinguish the most recent Chinese Airtex mechanical fuel pump from the previous versions. It has to...
3 1/2 hours draggin a trailer one way for a misrepresented car. And I asked all the right questions beforehand and saw vague pictures. Sometimes...
It is a Ford Y Block dual quad aluminum manifold. Will have ECG 9424 D cast on the bottom. The carbs are 56 units as they have spark valves on...
Viewing the pictures show that the passenger side exhaust manifold has some sort of "flange" on the front side. Thats not a stock item. Is that...
Trying to help a bud out who needs the original specs. Mostly he needs the duration.But would like everything. Thank in advance to those helpful...
Check to make sure that the ground brush is in the same position as your original brush. Dont flip the polarity. Oldmics
The NATIONAL SERVICE DATA book for 1957 mention the horsepower listing as above EXCEPT for the fuelie at 315. Also has camshaft info,carb...
I have a set of exhaust manifolds off a 57 T Bird if interested. Blasted them so they are clean and in excellent condition. Have them on FaceBook...
I"m sure I have a timing cover and a pan and sump for a car if interested.Probably a used water pump you could rebuild Oldmics
I"d be looking for another machine shop !!! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Squirrel"s advice above is excellent (as...
I think Spring is better than Fall Carlise. Seems like there is at some new junk being offered up after the winter hibernation. Just my humble...
Any spray down into the carb as the butterflys open ? Oldmics
CHRIST !!!!!!!!!!!!!!!!! - Hershey"s been Cancelled !!!!!!!!!!! Oh the humility . Oldmics
They have their ups and downs Oldmics
Jon"s website has the LIST numbers for all of the carbs you would be interested in http://www.thecarburetorshop.com/Kford.htm Go thru the list...
Boneyard Do you know what the numbers would be on the correct metering blocks for your carbs? I did a little digging and came up with a center...
Swade41 What book offered the info on the metering plates that you kindly posted up ? While not what Boneyard was looking for , its information...
I"m still in the dark as to if the Holley part number listed in these sheets is the actual part number stamped on the metering blocks? Oldmics
Since I deal with 50s machines those 40 - 50 big blue Holley Master Parts Catalog is what I refer to. Mines worthless after the 59 model year....
The large Holley book that I have has a part number listed for the metering blocks as does Jims above.Is a portion of that part number the same...
https://www.jalopyjournal.com/forum/threads/camshaft-for-dummies.1185252/ 1.03 to 1.30 on the video Oldmics
Also - please post up the location of these parts. Shipping such a heavy pair will be a consideration in pricing. Oldmics
You would do best to post these over at the Y Blocks Forever Forum http://forums.y-blocksforever.com/Default.aspx There are a coupla LYB guys...
Old Wolf - I love your posts BUT are you now blaming Y Blocks for MASS RIOTING ? Inquiring minds want to know ? Oldmics
Separate names with a comma.