The Jalopy Journal
It’s a whole mix of stuff. That main barn is a sales floor, with all those cars forsale. Justin of circle J upholstry is part owner, so he’s got...
Starting Spot: Speeding Springs [ATTACH] [ATTACH] [ATTACH] 1st Stop: Rex Rods, Martin Brothers / Brad Lindig Collection [ATTACH] [ATTACH]...
Thank you all for the feedback. Am I correct that a support isn’t typically required with (2) joints? I have one at the bottom of the column and...
I am looking for some help on steering / steering shafts. I have slight play in the steering wheel after replacing a number of components. Only...
This year will be our first year making the crawl and are looking forward to it!
We will be brining the '41, in fresh color. Making a long weekend and kicking it off at the BBQ on Thursday. [ATTACH]
I tried the solder, with no luck. Not sure why I didn't think to weld it.
Thank you all.
No luck at my Napa.
Can anyone offer some suggestions on how to update/replace the bulb socket on my '41 Chevy license plate bulb? I had one that worked for a bit,...
Was able to get it outside this weekend and let it soak some sun. Its by no means perfect, but I like it! [ATTACH] [ATTACH] [ATTACH] [ATTACH]
How many prints was it to create a single item?
That's so cool!
I know there has to be a reason, but why paint the frame post at the floor yellow?
Thank you
[ATTACH]
Well, the first attempt was a first attempt. Had some issues and a bunch of runs. Spent a week or so wet sanding it down as well as building a...
Thank you! I messed it up though. I have to sand most of it.
I tried to paint the car this weekend. It seemed to start off pretty well. Didn't finish very well. Now it looks like I'm going to learn how to...
I tried my had at painting the '41 on Saturday. I have a LOT to learn. [ATTACH]
ROb28: What is the green engine paint? looks wonderful!
He has an AWESOME YouTube channel that always has great content as well as very good description as to what and why he's doing something. Almost...
I chased a similar noise on my 283 last summer. turns out it was the fuel pump. I honestly don't even know how it was still pumping.
Spent a little time Sunday afternoon putting the yellow down on the '41 license plates. Not perfect, but not terrible either. [ATTACH]
The thing that is interesting to me is how the bracket, that appears to be the same, works in both conditions (adapter / no adapter)
The description says 1". I bet its 1/2" per side. I'm only guessing, but i bet Roadster Supply has created a race/bearing that fist the spindle...
I have been looking at a number of these kits, including this one. Where i believe they pick up that 1" has something to do with item #1 in this...
Im going to. I wasn't able to get into the new bushings. thought the dirty end was the issue. Didn't think about reaming them out.
That was my thought, but got excited with the cheap NOS parts. Where do I find the needed dimensions on those bushings?
Separate names with a comma.