The Jalopy Journal
Original 32[ATTACH]
If possible I use very short small diameter Phillips head screws. Get them at ace hardware. Been using them for years to hold the trim in place....
One of the aluminum pumps has a nice cast impeller. Helps keep cavitation down.
Help parts at auto store. The cards and ends are available. Push ends out clean paint and drop new ends in place.
Been running a 13 on the walker I have for 30 years
My take is the tilt will not work as it should because it to close to the dash. Looking at switch your hand looks to me like it will drag the...
The tanks were so easy to drop. I’m guessing GM saved a bunch of Money not doing a hole
The corvette split exhaust will give it a sound all its on.
GM dist. has Packard connector that snaps into place. How are you jumping the tac/dwell connector into the mix?
To be sure you can easily pop a door lock out. Number is stamped right on it.Trunk and door should the same.
Spin back in a turn could be a issue
I got what you need. Waiting on picture to move from phone to I pad. Send 8 bucks for shipping. Look at conversations
Several good locksmiths on the Ford Barn
Door panels made from abs plastic. Use screws to hold them on the door
Now you get to fix the stuff you broke while you helped him out.
Up to the firewall pad
[ATTACH]on the 85 I used we could collapse it to fit. This picture is sorta like it
On an 85 1/2 ton van. It was double D on the column end. Thr shaft from column to box would collapse. The box end was splined and fit my 525 box....
Ask the Ford barn.
You like this[ATTACH]
Let me look in the junk I should have a deck lid light to give you.
Several power brake conversion kits for the tri fives tell to redrill the push rod hole lower on the pedal.
Let me look in my junk
Bought a brand new Pontiac LeMans in 1967. Small caps. As soon as I got my tax return I bought the chrome reverse. That’s when I found out all...
I ve done probably 35 hard tops and convertibles. I’ve never found the trick. Trial an error have been the secret.. get the guides located and in...
Hope you set the engine in with a radiator so you have room. I did a 36 and didn’t cut the firewall. Had only room for the motor an none for a...
Put regulator in the bottom of the door. Install win the door. Get the glass in just far enough to slip the the lower onto the regulator. Then...
Local Ace hardware has them. You will need to cut one down.
Might be air. The time I crossed hoses it spun like crazy. Glad I didn’t have hands on wheel.
Look very much like my TCI frame and mounts. So do the shock mounts
Separate names with a comma.