The Jalopy Journal
There was a old 51 hardtop like yours that ran around denver- aurora colo. I t was real fast and the owner named it double ugly
This seat has been in inside storage for over 20 years, nice cool basement, foam is perfect and soft, no rust at all, [ATTACH] [ATTACH] [ATTACH]...
Thanks guys. i am fairly sure that it is a L88 cam after researching the numbers, it was new in this 396 so i took it out and bought a milder...
have a new camshaft that I removed from a fresh 396 engine. The numbers on the end are as follows 5536 and A145C from what I figure it is a L88...
my avatar pic
nice
SOLD
black powder coated, new quick performance 31 spline 9 inch rear axle, new big brake ford, new 370 ford posi, new pem racing drive shaft, all new...
I sold the shell of this car but still have all the components including thecomplete new frame. will part out.
500.00
500.00 This is a one year 57 chassis but will mount the other tri five bodies, straight never bent, good for a gasser project. or to replace a...
The price is 13,000. I have a kansas city built 1956 black on black body white and black interior coded project with good colorado title I have...
It is a blue, but not a dark blue. I bought the transmission and converter from a nice 55 chevy truck, that the guy went with a 4l60 transmission....
I found a part number #20411
I believe most gm stock convertors are 12 inch diameters, and I have a 11 inch convertor. I am wondering if anyone has a stab on what the stall...
Thanks guys. I locked down the pinion to a heavy engine stand, and put in the long axle passenger side, then with the big bar I was able to turn...
Yeah Jim. I kinda wished they would have done it right in the first place.
exactly. I have put both axles in and tried twisting, no joy at this point. This is a new setup and I am sure the clutches are really tight
how do you loosen the clutch pack on a completed 9 inch ford pumpkin to make adjustments to the clutch pack splines?
I believe it is a 850 off a big block chevy crate engine, as the title states the number is 80714, any ideas of the correct size?
It's a 2 bolt block. Whatever it checks out to be, I have a couple sets of heads to cover my build. I really thank you guys for all the help>
Laying a flat edge across the dome it measures pretty close if not exact to 3/16th of an inch. I am gonna have it taken apart and checked out for...
[ATTACH] [ATTACH]
Good info, I don't have a intake manifold or carb picked out yet, but I do have a holley, ooops I believe 780 double pumper in my inventory. I...
Thanks again. I am gonna to some research on what roller cam, lifters and rockers I want. I am putting all this in a 56 chevy 150 2 door sedan,...
I have a couple of big block head sets, one is 3933148 and the other is 353049 in your opinions which would be a better set to use. Any opinion on...
thanks for the info. the block is notched, and I think I have a set of the big valve 454 heads. I will look up there numbers
both heads are stamped 3904390,, GM4T,, one is marked h16 67 and the other is marked g26
oval, and would a set of 454 open chamber heads work on this engine to keep the compression down
I just picked up a 396 375 horsepower short block with a set of 66 to 67 427 close chamber heads. what is a good guess on the compression , and...
Separate names with a comma.
The Jalopy Journal
