The Jalopy Journal
I bought a Speedway Disc brake kit 910-31909 to replace my F1 brakes [maybe]. Rotors are heavier than I thought they would be. So thought of...
Aren't those pistons for a "twisted Wedge" head?
Flaming is. .Wow. I used Borgenson. Aluminum.
Sure, only weighs a little over 2k lbs.
You don't have to take it apart to find ratio
One more[ATTACH]
[ATTACH] Vacuum pump [ATTACH]Cut down test block[ATTACH] Seat cutter checking on lathe[ATTACH] Valve with spring and o ring for guide...
I would say yes!
Yes and agree about spring pressure adding to seal but to check [like shops do on U tube] before assembly as the valve seat machines all seem to...
As long as arbor can get tight before it bottoms out then center is found [from what I've read]. When I put valve in to check I put a small...
Set up in mill so I have digital read out to maintain depth and bump stop under cutter to take up any play in the universal connection between...
I am wondering if the heads can be milled, probably could handle .050 but I don't know where that would put the cc's. Edelbrock for answer.
Maybe delayed solar eclipse
tomcat11 : Lapping compound [clover] I have is 600 and it doesn't take much to wear the tiny high spot on the seat [shows as a scratch on valve...
To double check vacuum pump I replaced gauge with a new new one; with thumb stall it will do 25". So in back tracking I checked the cutter inserts...
Dig them Socks!
So what is the goal here Mr. Ivo ?
If the first and last letter are correct then most probably read it ok.
Is he making a pass or just a burnout?
Isn't the fan backwards pitched, reverse rotation /
I bet its been 15 years since I saw a Nomad in person!
I have a vacuum pump which does 20" by the gauge that is inline. Test block with worn guide. Cut a seat with Neway tool. Dropping in new valve...
I would most likely trip over the tether. Wife suggested some type of beeper finder thingy.
Trying my Neway valve seat cutter on a cut down Crosley block, seems to do ok but I have issue seeing with My Head and the Bridgeport Head...
Where was that? Lakes?
Great pic, hauling ass in a v8 Ford!
The way I read is you need an adapter to go from 1/8npt female [on valve] to M10 inverted female. I bought some years ago from Aeroquip dealer but...
Unread.
Me too!
Wife found glasses, guess I'll keep her around for another 30 years!
Separate names with a comma.